Phantom Flex4K 3D Set

The complete 3D stereoscopic image recording set based on super speed 4K cameras Phantom Flex4K.

The 3D set consists of:
 

Beam splitter rig

Ultralight and ergonomic rig construction allows a quick camera sync.
 

Cameras

Our Phantom Flex4K cameras are two identical and connected devices. They were original labeled with consecutive serial numbers and extra fitted for our stereoscopic 3D based requirements. Owing to this fact the cameras allow an accurate shot capturing at 1000fps, at the full 4K resolution (4096px × 2160px – DCI 4K format). It supports HD recording at a bracing over 3000 fps.

  • 4K resolution
  • Full capability
  • PL-Mount lenses
  • Electronic Viewfinder Alphatron EVF-035W-3G (with charger)
  • Transport Cases

 

Lenses

  • 2 x 5 x Zeiss CP.2 15/25/35/50/85mm PL or
  • 2 x 9 x Cooke miniS4/i 18/25/32/40/50/65/75/100/135mm PL or
  • 2 x Angenieux Optimo DP 16-42 PL + Optimo DP 30-80 PL

 

Rig configuration

 

Tripods and Fluid Heads

  • Sachtler Cine 30 HD Fluid Head
  • Sachtler Cine 150 L Tripod (long)
  • Sachtler Cine 150 M Tripod (medium)
  • Bowl Adapter 150 mm
  • Transport Cases

 

Extra 3D Equipment

  • GenLock Sync
  • TimeCode Sync
  • Image Analyser
  • 3D Image Multiplexer
  • FSI 17,3” reference monitor
  • CinemaVision calibration tables - large
  • CinemaVision calibration tables – small
  • Datacolor SpyderCHECKR

 

Power supply set

  • 1 x 4-channel V-lock battery charger
  • 6 x V-Lock 190Wh batteries
  • 2 x V-Lock Power Plate

 

Software

 

 
 

Broadcast monitor and video recording

  • BlackMagic Design SmartView Duo Monitors
  • BlackMagic Design SmartScope Duo 4K Monitors
  • 2 x 4K BlackMagic Design HyperDeck Studio Pro 2 Disc Recorders
  • 4 x SSD Disc 240GB
  • BlackMagic Design Teranex 3D Converter
  • Rack Transport Case
  • OLED Reference Monitor
    • Flanders Scientific FSI CM250 24,5" or
    • Flanders Scientific FSI CM171 17,3"
  • TV LED 32” 3D
  • TV Transport Case
  • SDI Cables (overall 200m-lenght)
  • Camera and recorders settings working station

 

Aladin 2 Complete Kit

Hand unit

  • Transceiver (AL2-T400) with antenna (FANT)
  • Focus/irsis module (AL2-FI)
  • Zoom module (AL-Z)
  • 2 x Battery (AL-BAT)
  • Charger (AL-CH)

Motor controller

  • Receiver/controller Aladin MKII (AL2-MCU8-401) with antenna (FANTR)
  • Extension module (AL2-EXT-BASE)
  • Connection Cable (AL2-INTF)
  • Module for connecting digital and analog manipulators F+Z (AL2-EXT-HK)
  • Cables standard Canon to connect manipulators F+Z (INT-HKC-F + INT-HKC-Z)
  • Fujinon standard cable to connect manipulators F+Z (INT-HKF-F + INT-HKF-Z)
  • Module for broadcasting (VTR, Talkback Switching, FIZ Follow, Read Out) via Camera Lens Interface
  • Hirose cable12 pin (AL2-INTF-LP)
  • Start/stop cable for RED cameras - BNC (Al2-COFEBNC)
  • Start/stop cable for Arri cameras - 11-pin Fischer (Al2-COFA)
  • 15/19mm rod mounting bracket (MN-RMB1 + 401-49-RAIL)

Servos

  • 6 x Heden Servo (M26VE)
  • 3 x Servo cable 100cm (AMOTD100)
  • 3 x Servo cable 60cm (AMOTD60)

Power cables

  • D-Tap (AB-AL2)
  • XLR4 (XLR4-AL2)
  • Stedicam 12V 2pin Lemo (STM-AL2)
  • Stedicam 24V 3pin Lemo (STU-AL2)
  • PRO/Artemis system 12V 4pin lemo (PRO-AL2)